cardboard box : car

Moo loves pretending to drive her dad's car so I decided to make her own cardboard car to have in the garage with keys, dashboard, working streering wheel and all.

YOU WILL NEED:
1 small cardboard box 
1 large cardboard box
several coloured bottle top lids
1 5cm long screw
2 washers
toilet roll
glue gun
spare keyring
paper tape
paints and pens to decorate
1. Firstly turn boxes inside out if you are recycling old boxes like I am. The small box is you bonnet, the large box your main part of the car. Join the 2 boxes together, using the flap to create an angled windshield down on to your bonnet. Cut the sides to fit the shape and tape up all your joins.

2. Cut out a rectangle for your windshield and the top of the box for where you want to sit, and doors. Mark out with a ruler if you want nice straight lines.

3. To make the dashboard - using a spare piece of the cardboard cut a piece the width of your car. Cut out your steering wheel shape, make a hole in the centre of you steering wheel with a sharp pencil. Mark the place on the dashboard you want attach this, make hole with pencil. Cut a 3cm length from your toilet roll for your steering column. Glue to the underside of your steering wheel. Place one washer on your screw and push through the hole on your steering wheel and through the dashboard hole, attach 2nd washer and glue in place on back of dashboard. Your steering wheels should turn. Glue a bottle lid on your steering for horn and to cover screw end. Glue more bottle lids for buttons and decorations onto your dashboard. Tape the dash board into your car so it sits below the windshield, and so there is room your little ones legs to fit underneath.

4. Cut out different key shapes for your house and car and attach to the keyring.

5. Cut 4 equals circles for your wheels, decorate and stick to sides of the car using glue gun. Cut strips for front grill and circles for you headlights and glue in place.


6. Paint and decorate your car.... VROOM VROOM!